BVWYC - MILP24441/3ASH F152 WHITE

  • MSDS: BVWYC
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: MILP24441/3ASH F152 WHITE
  • National Stock Number: 8010-00-421-2435
Product Identification

Product ID:MILP24441/3ASH F152 WHITE
MSDS Date:03/11/1991
FSC:8010
NIIN:00-421-2435
Kit Part:Y
MSDS Number: BVWYC

Responsible Party
INTERNATIONAL PAINT CO INC
2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

N-BUTYL ALCOHOL (1-BUTANOL) (VAPOR PRESSURE 4.0 MM HG @

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 35-40%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 15-20%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITANT, MAY CAUSE
VISION IMPAIRMENT EVEN BLINDNESS. EYES: CORROSIVE. CAUSES
IRREVERSIBLE EYE DAMAGE. SKIN: IRRITATING. MAY RESULT IN
DERMATITIS. MAY CAUSE SENSITIZATION OR OTHER ALLERGI C RESPONSES.
INHALATION: IRRITATION OF RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-HEADACHE AND DIZZINESS AND
UNCONSCIOUSNESS. INGESTION-GASTROINTESTINAL TRACT IRRITATION,
NAUSEA, VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: REMOVE
CONTAMINATED CLOTHING WASH SKIN WITH PLENTY OF SOAP AND WATER.
LAUNDER CLOTHES BEFORE REUSE. INHALATION: REMOVE TO FRESH AIR.
GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGESTION: CALL A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMITING.

Fire Fighting

Flash Point:99.0F,37.2C
Lower Limits:1.4% BY VOL
Extinguishing Media:FOAM, CO2, DRY CHEMICAL. USE WATER TO COOL UNOPENED
CONTAINERS, BUT MUST NOT BE USED AS AN EXTINGUISHING MEDIA.
Fire Fighting Procedures:CONTAINS FLAMMABLE SOLVENT. DON'T USE IN AREAS
WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:SMOTHER W/ABOVE EXTINGUISH MEDIA. TAKE
CARE TO PREVENT SPREAD OF BURNING LIQUID WITH WATER. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.

Handling

Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS W/NFPA CLASS GIVEN BY OSHA CLASS
IN SECTION 4.
Other Precautions:CHRONIC OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS
BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. AVOID
BREATHING DUST OR CHIPS FROM SANDING OR BLASTING SURFACES COATED
WITH THIS PRODUCT.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT USE
NIOSH FILTER RSPRTR TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS. USE NIOSH RESPIRATOR
IN ACCORD W/ 29CFR 1910.134 (REMOVE PARTICULATES & VAPOR).
Ventilation:PROVIDE SUFFICIENT VENTILATION, IN VOLUME & PATTERN, TO
KEEP TLV & LEL OF HAZARDOUS INGREDIENTS BELOW LIMITS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SFTY GLASSES, CHEM GOGGLES, FACE SHIELD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:244F,118C
Vapor Density:> AIR
Spec Gravity:12.0 LB/GAL
Evaporation Rate & Reference:SLOWER THAN ETHER.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:31

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, NITROGEN COMPOUNDS.
Conditions to Avoid Polymerization:STORE AWAY FROM DIRECT HEAT, FLAME
OR SPARK.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.